Reekie Experience
274 01/05/2003 SAFETY SHUT-OFF VALVE SEAT
274 01/05/2003 CLAMP SPINDLE
274 01/05/2003 3B OUTER BARREL ASSEMBLY
274 01/05/2003 3B INNER BARREL ASSY
275 01/05/2003 INTERNAL LEVER
275 01/05/2003 SWIVEL FOR INTERNAL LEVER C/W LOCKWASHER & NUT
269 29/04/2003 PEGSON WATER PUMP
267 28/04/2003 HIRE OF R2F C/W SHORT COLLET TO SUIT Ø52.5MM X 50MM LG BORE – RADIUS OF TOOLING IS R2.0mm
257 15/04/2003 SURVEY CARSFAD & EARLSTON FISH GATE ROLLER STRIPS 8-OFF STRIPS
258 15/04/2003 BOSS MACHINING IN CABINETS AT SELLAFIELD
243 08/04/2003 SURVEY 3-OFF CRANE PEDESTALS
252 07/04/2003 HIRE OF R3000
253 05/04/2003 WINCH PINION SHAFTS
239 03/04/2003 D9 HUBS
237 02/04/2003 HIRE OF T115 TO SUIT Ø97 & Ø66MM PIPE AND ONE OPERATOR TO M/C GS HYDRO GROOVES
238 02/04/2003 MACHINE FLANGE OD FROM Ø2435MM TO Ø2425MM X 60MM LONG
235 01/04/2003 20″NB PIPE CUTTING & GROOVING USING C3
227 31/03/2003 ROLLER CAGE SIDE PLATES
228 31/03/2003 ROLLER CAGE SIDE PLATES
229 31/03/2003 CI SEAL RING COMPLETE (2 PIECES) – AS PER SAMPLE
229 31/03/2003 FULL ST/ST FILTER GRID OUTSIDE DIAMETER MACHINED TO SUIT CI WHEEL & RETAINER
229 31/03/2003 1/2 SECTION STAINLESS STEEL FILTER GRID – DRILL Ø9/16″ HOLES TO SUIT CI WHEEL RETAINERS
229 31/03/2003 64-OFF 1/2″ BSW TAPPED HOLES TO BE DRILLED IN 2-OFF CI WHEELS
229 31/03/2003 CS WEAR RING HALF – SURFWARD 650 HARD FACING
230 31/03/2003 ROTOR FRONT COLLAR
230 31/03/2003 FRONT END SEAL
230 31/03/2003 Rotor Blade Actuating Pin
230 31/03/2003 ROTOR BLADE
230 31/03/2003 GOVERNOR BODY GASKET
230 31/03/2003 CYLINDER
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >