Reekie Experience
171 14/02/2003 BRASS GLAND
171 14/02/2003 SAFETY SHUT-OFF VALVE BODY
171 14/02/2003 COUPLING YOKE
171 14/02/2003 SAFETY SHUT-OFF VALVE SEAT
171 14/02/2003 CLAMP SPINDLE
171 14/02/2003 DISTANCE PIECE
171 14/02/2003 DISTANCE PIECE
171 14/02/2003 OUTER BARREL ASSEMBLY
171 14/02/2003 OUTER BARREL ASSEMBLY
171 14/02/2003 INNER BARREL
171 14/02/2003 INNER BARREL
168 13/02/2003 3.4M FLANGE FACING
169 13/02/2003 PLATE BASE CELL
165 10/02/2003 DRILLING & BORING CLEVIS PINS UPPER & LOWER ON GANGWAY
159 05/02/2003 KALMAR 15 TONNE FORKLIFT TRUCK -WAGON AXLE, SCREWCUT WITH 1149 M/C 3″ X 12UN FORM, REEKIE SUPPLY OF NEW NUT
160 05/02/2003 PITLOCHRY DAM GATES – SKIM ONE SIDE ONLY
162 05/02/2003 PLATE BASE CELL
158 04/02/2003 MCS NIKKI – STERN TUBE BORING
155 03/02/2003 MOUNTING PLATE
155 03/02/2003 MOUNTING PLATE
152 31/01/2003 DRILL 4-OFF HOLES 1.1/4″ BSF. FAN BLOWER GEAR-RING ON UNIT ?
148 28/01/2003 Rotor Blade Actuating Pin
148 28/01/2003 ROTOR BLADE
148 28/01/2003 180DR AIR MOTOR EITHER C/W OR C/C
142 24/01/2003 MILLING & TREPANNING PENETRATIONS ON TFE’s PUQ PLATFORM
143 24/01/2003 BEARING SWAP 22224KC3 2-off BEARINGS CHANGED ON A BALL MILL
139 21/01/2003 HIRE OF NB12 MACHINE WITH MODIFIED TOOLHOLDER TO SWING WITHIN 125MM
134 20/01/2003 LINE BORING 2-OFF A-FRAMES ON THE MV SMIT YOUNG
136 20/01/2003 COUPLING YOKE HANDLE
136 20/01/2003 LOCKING RINGS
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >