Reekie Experience
136 20/01/2003 HINGE PIN 3/8″ X 1.1/8″LG
136 20/01/2003 ATOMISER SUPPORT
136 20/01/2003 ATOMISER TAILPIECE
136 20/01/2003 ATOMISER TAILPIECE ASSEMBLY
136 20/01/2003 DISTANCE PIECE COVER DOOR
136 20/01/2003 SAFETY SHUT-OFF VALVE BODY
136 20/01/2003 DISTANCE PIECE
136 20/01/2003 COUPLING YOKE
136 20/01/2003 SAFETY SHUT-OFF VALVE SEAT
136 20/01/2003 CLAMP SPINDLE
132 16/01/2003 HIRE 1149 BORING MACHINE IN AIR MODE
133 16/01/2003 MACHINING OF COVER LOCATION DIAS AND FACES ON STAY RING
130 14/01/2003 SMALL BLENDER – STUFFING BOX MACHINING TO REMOVE
121 08/01/2003 TAPER WEDGES
123 08/01/2003 MACHINE 2-OFF LARGE FLANGES
118 07/01/2003 collect old pins, turn to common clean diameter
118 07/01/2003 encon bushes
118 07/01/2003 measure up ramp lug bores on car deck for bushes
and create a table of sizes
116 06/01/2003 2B MARK’Y’ JET SPRAYERS
112 20/12/2002 ROLLER SHAFT CASING
110 19/12/2002 design, manufacture, testing and use on site of equipment to machine diesel exhaust v/v’s
111 19/12/2002 1000 CONE UPPER FRAME DOWEL REPAIR ONLY
108 17/12/2002 BEVEL 12″nb SCH20 A333 GR6 PIPE TO ANSI B16.25
109 17/12/2002 TAPER WEDGES
101 12/12/2002 POST WELD MACHINING OF MAIN BOILER SUCTION FACE
101 12/12/2002 PRE-MACHINE SUCTION FACE OF MAIN BOILER FEED PUMP AT LONGANNET PS.
102 12/12/2002 LONGANNET PS – MAIN BOILER & AUX FEED PUMP STUD DRILLING – 3.1/2″ DIA
103 12/12/2002 MV LOCH STRIVEN – RAMP INNER HINGE BORING
99 11/12/2002 MANUFACTURE OF PHOSPHUR BRONZE BUSH AND FREEZING IN WITH LIQUID NITROGEN
99 11/12/2002 MACHINING PINTLE OF ECCENTRIC VALVE SPINDLE
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >