Reekie Experience
8450 27/10/2017 J-1170 Bearing Cartridge Surfaces (Half Moons), machine two of half faces 580idx930od
8451 27/10/2017 UPPERFRAME MACHINED TO REPAIR TAPER ONLY
8451 27/10/2017 1545 UPPER FRAME TO MACHINE TAPER THEN WELD AND REMACHINE AS PER DRAWING
8453 27/10/2017 TWO OFF MILD STEEL LINERS
1 OFF 8.9375″ OD X 8.688″ ID X 2″ LONG
1 OFF 8.811″ OD X 8.688″ ID X 2″ LONG
8454 27/10/2017 Machining 400x409UC in London
8448 26/10/2017 AS197 and OPV, insitu machining of inboard end face of ONE stern tube
8449 26/10/2017 Ø1.1/4″ -7UNC Hole Reclamation on Piercing Cylinder
8441 25/10/2017 CONEHEAD WELD REPAIR
8443 25/10/2017 VISUAL INSPECTION & FUNCTIONAL TEST
RB40MCAIRBUS003
8444 25/10/2017 Gr Conquest Dreggen Crane, Line bore 1 pair of Ø150×45 bores on Crane Boom
8438 24/10/2017 Loch Beannacharan Gate Guide Machining
8435 23/10/2017 CONEHEAD WELD REPAIR
8430 20/10/2017 Stepped Dowels
8430 20/10/2017 ST ST STUD COLLAR ( ITEM 012 )
8430 20/10/2017 ST ST NECKED STUDS ( ITEM 011 )
8430 20/10/2017 ST ST PLUG ( ITEM 010 )
8430 20/10/2017 ST ST COVER PLATE ( ITEM 009 )
8430 20/10/2017 Machining of Flange (Item 008C) when welded to vessel
8430 20/10/2017 ST ST VESSEL FLANGE1110 MM O/DIA X 910 MM I/DIA X 50 MM THK ( ITEM 008C )
8430 20/10/2017 ST ST SUPPORT BLOCK
8430 20/10/2017 ST ST LOCATION BLOCKS
8430 20/10/2017 ST ST TOP SHIELDING PLATE
8431 20/10/2017 Pup Pieces 36″ NB x 19.1 Wall x 500mm Lg
8431 20/10/2017 Pup Pieces 36″NB x 19.1 Wall x 372mm Lg
8431 20/10/2017 Pup Pieces 36″NB x 19.1 Wall x 339mm Lg
8431 20/10/2017 Pup Pieces 36″NB x 19.1 Wall x 300mm Lg
8431 20/10/2017 Pup Pieces 30″NB x 19.1 Wall x 500mm Lg
8431 20/10/2017 Pup Pieces 30″NB x 19.1 Wall x 343mm Lg
8431 20/10/2017 Pup Pieces 48″NB x 25.4 Wall x 600mm Lg
8431 20/10/2017 Pup Pieces 48″NB x 25.4 Wall x 300mm Lg
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >