Reekie Experience
8272 17/07/2017 Air Seal Ring
8268 14/07/2017 GATE SHAFT ‘C’
8268 14/07/2017 GATE SHAFT ‘B’
8268 14/07/2017 GATE SHAFT ‘A’
8268 14/07/2017 Bushing of Gate Indicator Post
8269 14/07/2017 Sideplate Inner Forming Jig
8269 14/07/2017 Sideplate Outer Forming Jig
8266 13/07/2017 ITEM 02 COVER
8263 12/07/2017 GRADE 8.8 SELF COLOURED SET SCREWS M12 X 35 MM LONG (700-0207-70
8263 12/07/2017 ITEM 02 LOCKING PLATE
8259 10/07/2017 CLUNIE STRUTTING GEAR TRUNNION BUSH
8259 10/07/2017 CLUNIE GLAND C/W TANGENT POSITIONS
8259 10/07/2017 CLUNIE STRUTTING GEAR STUFFING BOX
8259 10/07/2017 Clunie Drum Gate Trunnion Boring
8257 07/07/2017 Accurate inspection of bores and faces of new Calmac Ferry Gearboxes
8254 05/07/2017 Light Mounting Assembly
8253 04/07/2017 Bogie Plate Machining
8253 04/07/2017 Bogie Plate Machining
8245 03/07/2017 Tip Membrane
8245 03/07/2017 Tip Membrane
8245 03/07/2017 Tip Membrane
8245 03/07/2017 Tip Membrane
8245 03/07/2017 Tip Membrane
8245 03/07/2017 Tip Membrane
8245 03/07/2017 Tip Membrane
8245 03/07/2017 Tip Membrane
8245 03/07/2017 Tip Membrane
8245 03/07/2017 Tip Membrane
8245 03/07/2017 Tip Membrane
8245 03/07/2017 Tip Membrane
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >