Reekie Experience
8117 10/04/2017 Taper Weld Repair & Rough Bores 1380 Dia and 1670.1/1669.9 Dia
8114 06/04/2017 Front Section Tube (Item B)
8114 06/04/2017 Rear Section Tube without Flange (Item A)
8114 06/04/2017 Rear Section c/w Flange (Item A)
8112 05/04/2017 1000 CONEHEAD
REMACHINE AS PER DRAWING 603-9106
8113 05/04/2017 COST FOR PALLET AND PACKAGING FINISHED COMPONENTS TO RENFREW
8113 05/04/2017 C.S. BRUSH PLOUGHS c/w FLATS and SCREWS
8110 31/03/2017 Design and Manufacture of Heat Exchanger Flange Face Clocking Tool
8104 30/03/2017 16″ 900# Swivel Flange Machining
8108 30/03/2017 Haitian injection moulding machine fixed platen
Insitu machining to open out 100 dia x 20 dp counter bore to 125 dia x 20 dp
8109 30/03/2017 VISUAL INSPECTION & FUNCTIONAL TEST
RB40MCAIRBUS003
8098 27/03/2017 Scarfing, Boring, Facing and Weld prepping of 22” Pipes
8096 25/03/2017 Lance Tube Rear Section
8096 25/03/2017 Lance Tube Rear Section
8096 25/03/2017 Lance Tube Assembly
8096 25/03/2017 Lance Tube Machining Front
8096 25/03/2017 Lance Tube Machining Rear
8097 25/03/2017 Turnbuckle Eye Pin (X = 180mm)
8097 25/03/2017 Turnbuckle Eye Pin (X = 160mm)
8097 25/03/2017 Turnbuckle Eye Pin (X = 150mm)
8090 23/03/2017 Lance Tube Assy IK4M
8090 23/03/2017 Feed Tube Machining
8090 23/03/2017 Feed Tube Machining
8090 23/03/2017 Feed Tube Machining
8090 23/03/2017 Lance Tube Assy
8094 23/03/2017 Transition Head (Item -/1C)
8094 23/03/2017 Inspection Stubs
8094 23/03/2017 Steam Direction Indicator (Item -/1D)
8094 23/03/2017 Diaphragm (Item -/1B)
8094 23/03/2017 Spray Nozzle (Item -/1A)
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >