Reekie Experience
8043 21/02/2017 FACING TOOL 3MM RADIUS CRANKED
8043 21/02/2017 FACING TOOL 3MM RADIUS 42MM LONG
8043 21/02/2017 22 WH LOCKING SCREW (SHORT)
8043 21/02/2017 INSERTS FOR ALUMINIUM MBX1 UNIT
8040 20/02/2017 FLANGE & TUBE for LANCE TUBE ASSEMBLY
8040 20/02/2017 Feed Tube Machining
8040 20/02/2017 Lance Tube Assy
8042 20/02/2017 COUPLING GUARD FOR PUMP TO GEARBOX
8029 14/02/2017 Reworking of original Junction Box Housing
8029 14/02/2017 Junction Box Housing Assembly
8030 14/02/2017 Viewport Test Retaining Ring
8030 14/02/2017 Viewport Test Fixture Retainer Plate
8028 13/02/2017 Lance Tube Assy
8028 13/02/2017 Lance Tube Assy
8028 13/02/2017 Lance Tube Assy
8028 13/02/2017 Lance Tube Assy
8028 13/02/2017 Feed Tube Machining
8028 13/02/2017 Feed Tube Machining
8028 13/02/2017 Feed Tube Machining
8020 09/02/2017 DRILL AND TAP 1-OFF M12 HOLE IN 3-OFF UNITS
8015 08/02/2017 MPI Adventure, onsite (or insitu) machining of eight 4570 id x 5000 od flanges of grillages
8017 08/02/2017 Machining off 2.4M OD x 1.85m high Can and 2.4m OD flange
8017 08/02/2017 LID MACHINING ONLY
8018 08/02/2017 Gripper Jack Cap (Item 5)
8018 08/02/2017 Gripper Jack Piston (Item 4)
8018 08/02/2017 Gripper Jack Base (Items 2 & 3)
8019 08/02/2017 St St Pipe 17.5 OD x 11.5ID x 38mm Lg
Mat’l Spec: 310
8019 08/02/2017 St St Pipe 17.5 OD x 11.5ID x 38mm Lg
Mat’l Spec: 310
8019 08/02/2017 St St Pin 10mm Dia x 135mm Lg
Mat’l Spec: 310 Stainless
8019 08/02/2017 St St Pin 10mm Dia x 135mm Lg
Mat’l Spec: 310 Stainless
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >