Reekie Experience
7734 29/07/2016 Hire of Drilling Machine
7730 26/07/2016 ITEM 03 BRACKET
7729 25/07/2016 ITEM 02 END PLATE 176 MM O/DIA X 10 MM THICK
7729 25/07/2016 ITEM 6 PACKING 20 MM THICK
7729 25/07/2016 WASHER FOR W.S.P SENSING PROBE
7729 25/07/2016 KEEP PLATE
7724 22/07/2016 Steam Generator Manway Stud Drilling
7721 21/07/2016 Drax Machining of an HP steam Chest ESV Valve Seat Location, and machinig out MBFPT Governer Valve Seat
7722 21/07/2016 Aluminium Plate 750 x 700 x 50mm Thk
7723 21/07/2016 Jangkrik Flex Fatigue Drilling
7720 20/07/2016 VISUAL INSPECTION & FUNCTIONAL TEST
RB40MCAIRBUS003
7720 20/07/2016 VISUAL INSPECTION & FUNCTIONAL TEST
RB40MCAIRBUS001
7718 19/07/2016 UPPER GEAR MODULE SHIM FOR
7718 19/07/2016 Azimuth Thruster Bore Survey
7718 19/07/2016 Bearing Housing Upper Gear Module
7718 19/07/2016 Bearing Housing Upper Assembly
7714 14/07/2016 Bower Quarry, screening plant, pulley shaft, machining
7711 13/07/2016 SUTU Main Body Markup for ODI interface
7709 12/07/2016 DN2000 Columns Main flange as shown on drawing PB017326 Rev D
Machining detail as drawing 40600030 Rev A
7710 12/07/2016 Cable Process Reel Boring
7705 08/07/2016 Main Body Modification Required, open out 23×3= 69 holes from 35-38dia
7695 30/06/2016 LR GEAR RIB BORING
Airbus A330 Gear Rib Boring and Facing Machine
7696 30/06/2016 INSERT FOR MBX 2 UNIT FOR ALUMINIUM
7696 30/06/2016 HSS COBALT LH AND RH 3.6 DEG RAD BORE TOOL
7696 30/06/2016 45 DEG CHAMFERING TOOL
7696 30/06/2016 FACING TOOL 3MM RADIUS
7696 30/06/2016 78DIA BACK SPOT FACING TOOL
7696 30/06/2016 VISUAL INSPECTION & FUNCTIONAL TEST
RB40MCAIRBUS003
7696 30/06/2016 LR GEAR RIB BORING
Airbus A330 Gear Rib Boring and Facing Machine
7696 30/06/2016 Turning Tips for Aluminium
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >