Reekie Experience
9400 01/07/2019 COST FOR PALLET AND PACKAGING FINISHED COMPONENTS TO RENFREW
9400 01/07/2019 C.S. BRUSH PLOUGHS c/w FLATS and SCREWS
9396 28/06/2019 Machining two Lateral Support Pads each large can assembly
9388 27/06/2019 Frame Drilling
9389 27/06/2019 VISUAL INSPECTION & FUNCTIONAL TEST
RB40MCAIRBUS003
9390 27/06/2019 South Humberbank Power Station
9391 27/06/2019 Guides c/w with welded Cones
9394 27/06/2019 LR GEAR RIB BORING
Airbus A330 Gear Rib Boring and Facing Machine
9395 27/06/2019 LR GEAR RIB BORING
Airbus A330 Gear Rib Boring and Facing Machine
9385 25/06/2019 In Situ Machining of 6 Farrans Pontoons
9377 20/06/2019 Weld Prep Viper Box Forging
9378 20/06/2019 Machine to Remove Seized Nut
9376 19/06/2019 Boring and Sleeving of Upper Racking Arm Pin
9366 13/06/2019 Drilling M42x4.5 Holes
9367 13/06/2019 Spindle for Auto Drain Valve
9367 13/06/2019 Small Plate for Auto Drain Valve
9367 13/06/2019 Locknut for Auto Drain Valve
9367 13/06/2019 Large Plate for Auto Drain Valve
9361 12/06/2019 MH32 Insitu Milling, Facing and Boring Machine
Airbus A320 Undercarriage
JK Anchorage Machining
9364 12/06/2019 TEST PIECE 240MM DIAMETER BY 300MM LONG
9364 12/06/2019 DUE TO BENT BAR
9364 12/06/2019 Shaft 240 dia x 2600mm Lg
9358 10/06/2019 Deep Blue Main Reel Machining. Re-Machining 1 off 606×306 cut out
9349 05/06/2019 CHASE THREADS TO CLEAN BEST POSSIBLE
9349 05/06/2019 LEAD SCREW NUT FOR MUNRO MILLER
9349 05/06/2019 CHASE THREADS
9348 04/06/2019 Annual Service of Vent and Drain Machine
9343 03/06/2019 Payload Bay 1 Delrin Block Survey
9342 31/05/2019 HC-Texas Deck- Site machining – Machining 1 set of 7 off Ø4.3/16″dia pad eyes, and 1 set of 2off 3.9/16″dia pad eyes after welding to platform
9337 30/05/2019 Insitu machining (rotaboring) 70mm dia hole thru 323.9 od x 30 wt steam pipe to obtain 62 id x 12 id x 34 mm long sample
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >