Reekie Experience
7666 09/06/2016 LOAD TESTING
7666 09/06/2016 LLOYDS INSPECTOR
7656 06/06/2016 COST FOR BOX AND PACKAGING
7656 06/06/2016 MOUNTING PINS
7656 06/06/2016 DETAIL OF MACHINING FOR ANTI-CLOCKWISE FLAME HOLDER BARREL
7656 06/06/2016 DETAIL OF MACHINING FOR CLOCKWISE FLAME HOLDER BARREL
7652 03/06/2016 Ø913mm od x 10wt steel plus 10mm per side plastic coated pipe cutting and prepping
7654 03/06/2016 Spring Plank Tray
To Spot face 4-off Top Holes & 4-off Side Holes to remove corrosion
7654 03/06/2016 Spring Plank Tray
To Spot face 4-off Top Holes & 4-off Side Holes to remove corrosion
7648 31/05/2016 Open out 20 off holes from 34.9 to 37mm
7591 30/05/2016 Ceramic Roll Inner Steel Shaft Bearing Area Repair
7643 30/05/2016 Simar Esperanca 150T Crane Onsite Machining
7644 30/05/2016 Honing of Conehead
7644 30/05/2016 1000 CONEHEAD
REMACHINE AS PER DRAWING 603-9106
7644 30/05/2016 49 MM ECCENTRIC 1000 AUTOMAX
TO MEASURE ALL BEARING SIZES TURN IF REQUIRED AND FIT SLEEVE
7644 30/05/2016 ECCENTRIC FOR 1300 MACHINE TO CHECK ALL DIMENSIONS
7641 26/05/2016 Bolster Welded Assembly
7635 25/05/2016 ST ST PLATE 910 MM X 2283 MM X 3 MM THK
7636 25/05/2016 DETAIL OF MACHINING FOR FLAME HOLDER BARREL
7636 25/05/2016 MOUNTING PINS (REF-/1A)
7637 25/05/2016 3rd OPV, port & stb stabilisers, removal of two seized M42 spindles, one port one starboard, one upper and one lower
7634 24/05/2016 TO MANUFACTURE ACTUATOR EXTENSION PLATE AS PER SAMPLE AND TEMPLATE MACHINING OUTSIDE TO 6 MM THICK
7632 20/05/2016 Airbus A320 Gear Rib Boring and Facing Machine
7629 19/05/2016 Cabling Process Reel
7631 19/05/2016 Global Maritime designedTower Grillage, bolting ring
7626 16/05/2016 BOX FOR PACKING
7626 16/05/2016 MS STIRRUP
7627 16/05/2016 Bolster Welded Assembly
7621 11/05/2016 Ø90mm Grinder Shaft Repair
7622 11/05/2016 CVF Ships Lift Upper Over Travel Bracket Doweling
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >