Reekie Experience
7498 11/02/2016 Mainframe Repair Assembly
7492 04/02/2016 Airbus A320 Gear Rib Boring and Facing Machine
7483 02/02/2016 SHELL STONES TENSIONER PAD D130 2805
7486 02/02/2016 AFT EQUIPMENT LOCK SACRIFICIAL RINGS
7486 02/02/2016 FWD EQUIPMENT LOCK SACRIFICIAL RINGS
7480 29/01/2016 Bow Door Centre Cleats – Stena Superfast VIII
Spec. No. 05.09 – Bow Door Centre Cleats – Stena Superfast VIII
7475 28/01/2016 Parkburn Carousel System | Carousel Inner Basket and outer basket (Shore-Side Machining Scope)
7477 28/01/2016 OneSubsea modification to inboard structure 24″ CHC-C for surface testing
to Drawing SK-220776-01 sheets 1 thru 5 rev 01
7478 28/01/2016 1. To check some Chamber Door Mating faces dimential checks to prove they are uniform all the way round.
2. Technical welding job (Stainless steel) that can be done at your place.
3. Pressure vessel minor repair.
7473 27/01/2016 Drilling Works at AVS Bearings
7471 26/01/2016 BAR (ITEM 11 ) PAGE 9 OF 9
7472 26/01/2016 VM00000463 TREADPLATE MOD. DOORWAY TREADPLATE MOD CL158
7472 26/01/2016 MS ADAPTOR PLUG ( AS SAMPLE )
7472 26/01/2016 MS WASHER 3-1/4″ O/DIA X 2-1/16″I/DIA X 1-16 ” THK ( AS SAMPLE )
7470 25/01/2016 SWAGING BUSHES TO SUIT STEEL OVERSIZE BUSHES
7470 25/01/2016 SAAB 340 BUSHES
7470 25/01/2016 Saab 340 MSN 160 (G-LGNI)
on aircraft machining
7465 22/01/2016 Berry Press – Hole Reclamation
7468 22/01/2016 CF Fertilizers, Ince, Bedplate and Dowel Pin Machining, for Steam Turbine and LP Compressor
7462 20/01/2016 19 ROUND HFC DIAPHRAGM PLATE
7462 20/01/2016 19 Round HFC Diaphragm Plate
7451 14/01/2016 V5115C Hole Trepanning
7452 14/01/2016 MV Caledonian Isles – FWD & AFT Ramp Hinges
7449 13/01/2016 TO MACHINE WELDED BORE AS MANUFACTURE THREADED INSERT
7450 13/01/2016 Milling transverse frame bearing area
7448 12/01/2016 HMC Protector – Port Steering Gear Fitted Bolts
7445 08/01/2016 Mounting Plate Machining:
CMM survey of old mounting plate
CAD/CAM programme created to suit profile of old mounting plate
Machining of the repaired mounting plate to the survey taken of the old mounting plate.
7441 07/01/2016 JSM spoolbody, onsite machining, boring out, of undersize 18″ dia x 6.6″ long bore to 18″ diameter
7436 05/01/2016 VM00000463 TREADPLATE MOD. DOORWAY TREADPLATE MOD CL158
7430 15/12/2015 HSS COBALT LH AND RH 3.6 DEG RAD BORE TOOL
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >