Reekie Experience
7382 11/11/2015 C.S. BRUSH PLOUGHS c/w FLATS and SCREWS
7383 11/11/2015 Modification to 984x984x5995 long shaft, extend depth of M68x6px175 deep hole to 285 length of full form thread (305 depth of 62 dia)
7385 11/11/2015 OPV 3, stern tube boss, inboard face
7378 10/11/2015 hire of 1149 boring machine with 2.1/4″ x 2m long boring bar
7376 09/11/2015 RA BRACKET MODIFICATIONS
7376 09/11/2015 Interface Plate to have Top & Bottom face to remove distortion once drilled
7376 09/11/2015 Interface Plate to have Top & Bottom face to remove distortion once drilled
7376 09/11/2015 FAS-GW INTERFACE PLATE
7364 04/11/2015 Drilling, tapping and fitting of Recoil Inserts in 2-off Bogie frames, 16-off holes per frame.
7367 04/11/2015 Transportation costs associated with delivery of final goods or equipment to Customer
7367 04/11/2015 Hanger f Platform
7361 03/11/2015 QEC – Aft Island – Global Positioning Camera Seating and EOS Seating
7355 29/10/2015 3B MARK ‘Y’ JET ATOMISER ASSY WITH BELLOWS (FABRICATED BODY & TAILPIECE)
7354 28/10/2015 Hire of R3 machine with tools, to bevel 67id x 90od tube
7347 22/10/2015 Interface Plate to have Top & Bottom face to remove distortion once drilled
7347 22/10/2015 Interface Plate to be drilled & tapped
7345 21/10/2015 BP Kinneil Forties Pipeline System
AIr Coller Heat Excanger, C4304 Lean Amine Cooler
plug gasket seating faces
7345 21/10/2015 BP Kinneil Forties Pipeline System
AIr Coller Heat Excanger, C4304 Lean Amine Cooler
plug gasket seating faces Trial
7340 19/10/2015 Stringer Router Bottom Skin Rib22
7341 19/10/2015 South Compound, drilling of eight M36 holes uphand into taper plates
7334 15/10/2015 ECCENTRIC FOR 1300 MACHINE TO CHECK ALL DIMENSIONS
7332 13/10/2015 Air Products Tees Valley Gasifier support ring modifications
7326 09/10/2015 2B MARK’Y’ JET SPRAYERS
7327 09/10/2015 Trial for Bush Machining; CMM 4 off bushes, bore test piece to size, freeze in bush, test cut bore and face
7327 09/10/2015 HSS COBALT LH AND RH 3.6 DEG RAD BORE TOOL
7327 09/10/2015 TOOLHOLDER 141 – 153
7327 09/10/2015 TOOLHOLDER 141 – 153
7328 09/10/2015 QEC Fwd Bridge Island: Scot Seatings and EF Band Radar Seat
7323 08/10/2015 REWORK OF THE Ø216MM DIAMETER AS PER OSS MAST REWORK DOCUMENT
7323 08/10/2015 REWORK OF BOTH Ø216MM DIAMETERS AS PER OSS MAST REWORK DOCUMENT
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >