Reekie Experience
7264 01/09/2015 Transportation costs associated with delivery of final goods or equipment to Customer
7264 01/09/2015 FABRICATED HEAT VENT
7265 01/09/2015 ITEM 18 3.1/2″ X 1790.7 MM LONG SHAFT
7258 27/08/2015 Skandi Acergy, LADS, lateral alignment devices/track beams
7258 27/08/2015 extra work and or waiting time
7258 27/08/2015 unload Reekie equipment from container, clean, , return to standard form, service, store
7259 27/08/2015 Severn Power station, Valve Stud Removal
7257 26/08/2015 hire of 1149 boring machine with 2.1/4″ x 2m long boring bar
7254 25/08/2015 HIRE OF OPERATOR FOR COTTAM POWER STATION
7252 21/08/2015 Model MT (2″ ID to 8 5/8″ OD)
7247 19/08/2015 QEC Aft Bridge Fin – Medium Range Radar
7248 19/08/2015 Ship 727
Fwd & Aft Voith Prop seats
7244 18/08/2015 CVF QEC Prince of Wales Ship 2, Drilling of guide rails
7242 14/08/2015 JAWHOLDER REWORK
7242 14/08/2015 JW42 Half Bores & Faces:
Bore up to 3mm aside from 2-off Ø600mm x 50mm lg half bores.
Weld build each bore
Using our laser tracker set our boring bar to 1136.9mm size and to the surveyed 115.0mm size.
Spot face the inner faces to Ø810mm x 1.5mm deep
7242 14/08/2015 Jawstock Bearing Housings Ø460mm x 200mm long with 870mm between outer faces:
Machine each bore 1mm per side x 160mm long.
Weld build up each bore x 160mm long.
Finish machine each bore to Ø460mm H7 x 160mm length. Or to limit advised by Finlays’
7242 14/08/2015 J-1175 Swing Jawstock Milling:
7242 14/08/2015 MAIN FRAME ASSEMBLY
7238 13/08/2015 QEC – Bridge Deck EOS Seating
7236 12/08/2015 MS PIPES 60.3 MM O/DIA X 267 MM LONG
7235 11/08/2015 ONE PIECE UPPER FRAME (MC) TO MACHINE TAPER,WELD AND REMACHINE TAPER
7233 07/08/2015 9m Table machining
7229 06/08/2015 Volvo A30 Yoke Bearing Diameter Repair
7231 06/08/2015 ALLOY 800 TUBEPLATE584 MM O/DIA X54 MM THK
7226 04/08/2015 Clyde Pilot Boat, P bracket and gearbox alignment check to stern tube
7217 30/07/2015 MS COVER 508 MM O/DIA . X 73 MM O/ALL
7217 30/07/2015 20″MS ENDPLATE 508 MM O/DIA X 32 MM O/ALL
7217 30/07/2015 MS COVER MATING FLANGE 508 MM O/DIA X 36 MM O/ALL
7216 29/07/2015 ATOMISER TAILPIECES
7215 28/07/2015 Hire of Reekie Operator for min 3 days at Drax PS
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >