Reekie Experience
7209 23/07/2015 Hire of operator for West Burton
7206 22/07/2015 SHAFT 1250 MM LONG X 220 MM DIA TO MACHINE WORN FACE AND MACHINE SAME FROM FRONT FACE TO 56 MM DIMENSION,MACHINE 170 MM WORN DIAMETER AND FIT NEW STEEL BUSH
7206 22/07/2015 TO BORE LUGS TO 90 MM DIA THRO 2 OFF 50 MM THK PLATES 210 MM APART MACHINE OUT WORN KEYWAYS,WELD AND MACHINE TO FIT NEW KEYS
7206 22/07/2015 ANGLE BRACKET TO MACHINE WORN FACE TO CLEAN TRUE TO BACK FACE
7202 21/07/2015 Braefoot Bay, Internal skimming of an 18″ 600# flange from 407mm to a max of 433mm
7203 21/07/2015 North Uploader Crane – Stay arm locking plate hole drilling
7204 21/07/2015 Hire of operator to work c machine
7198 17/07/2015 MS ADAPTOR PLUG ( AS SAMPLE )
7193 15/07/2015 SPARE AIR MOTOR PACK
7189 14/07/2015 Project N11696 – Lance Tube Weld Prepping
7187 13/07/2015 1000 CONEHEAD
REMACHINE AS PER DRAWING 603-9106
7185 10/07/2015 SILWE FACILITY C20002 & C30003 TURNTABLE SLEW FRAME FABRICATED ASSEMBLY
7185 10/07/2015 SILWE FACILITY TURNTABLE BASE FRAME FABRICATED ASSEMBLY
7183 09/07/2015 Two 3m diameter pressure vessels at Halton Fabricators
7182 08/07/2015 North Unloader – One set of two lugs on the Apex of the Crane
7181 07/07/2015 MS BUSHES 193 MM O/DIA X 150 MM I/DIA X 150 MM O/ALL
7181 07/07/2015 MS BUSHES 280 MM O/DIA X 220 MM I/DIA X 230 MM O/ALL
7181 07/07/2015 MS BUSHES 215 MM O/DIA X 180 MM I/DIA X 185 MM LONG
7181 07/07/2015 MS BUSHES 183 MM O/DIA X 140 MM I/DIA X 95 MM LONG
7179 06/07/2015 South Humber Bank Power Station – Mid June Outage
7174 01/07/2015 NUT FOR STRUT
7174 01/07/2015 STRUT PLATE CUT FROM 4″ THK PLATE
7175 01/07/2015 Removal of Grubs in Cages
7175 01/07/2015 GENERAL PICKUP AND DELIVERY OF GOODS
7176 01/07/2015 INSERT FOR CREATING COUNTERSINK
7176 01/07/2015 JACKING FOOT INSERT
7176 01/07/2015 JACKING FOOT PAD
7176 01/07/2015 1 1/2″ BSP JACK -120 MM LONG
7176 01/07/2015 2.5 SERIES T-A STRAIGHT FLUTED ICS HOLDER WITH 36WH (TO DRILL 31 DIA HOLE AND CREATE 60 DEG COUNTERSINK)
7176 01/07/2015 AMEC SPADE DRILL INSERT 31DIA
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >