Reekie Experience
7127 05/06/2015 Machining of TAHS Guide Tube Assy
7123 03/06/2015 Loading Beam 2475mm Lg
7123 03/06/2015 MS FABRICATED PACKING
7123 03/06/2015 MS GUIDE ROD 64 MM O/DIA X 1360 MM LONG
7123 03/06/2015 STABILISING STRUT
7123 03/06/2015 FABRICATED GUIDE BRACKETS
7123 03/06/2015 SUPPORT COLUMN
7123 03/06/2015 SUPPORT COLUMN
7123 03/06/2015 LOADING BEAM2475 MM LONG
7121 01/06/2015 MV Wellserver – Kelly Tube Cap Removal x 2
7120 29/05/2015 Two 3m diameter pressure vessels at Halton Fabricators, Runcorn
additional inspection of vessels and dome ends
7119 28/05/2015 D375 Crop Ring Bolts
7115 26/05/2015 Volvo A30D – Swivel Hinge, machine welded repaired bore back to size
7112 22/05/2015 BEND SCREWED 5″ NPT ONE END ONLY
7110 20/05/2015 Two 3m diameter pressure vessels at Halton Fabricators, Runcorn
accuraterly inspect two flange faces on each
7106 18/05/2015 Charge Machine – Closure Unit Face
7101 15/05/2015 ST ST AXLES 2.1/2″ O/DIA X 12.3/8″ O/ALL
7104 15/05/2015 QEC – Stbd Diesel Generator DG3 – B12 Mounting Pad
7105 15/05/2015 First Milk – LDC Aspatria Cumbria, machine welded up Ø75x88mm seciton of shaft back to size
7100 14/05/2015 Cond HSG Support Stand
7100 14/05/2015 Conductor Support Stand
7097 13/05/2015 Longannet PS, 3B Boffa Fan shaft Machining
7094 12/05/2015 OneSubsea BP Juniper CVC – End cap cut off + weld prep, 10″.75 OD x 1.675″ ID
7094 12/05/2015 OneSubsea BP Juniper CVC – End cap cut off + weld prep, 10″.75 OD x 1.675″ ID
7096 12/05/2015 Mounting Plate Machining:
CMM survey of old mounting plate
CAD/CAM programme created to suit profile of old mounting plate
Machining of the repaired mounting plate to the survey taken of the old mounting plate.
7089 11/05/2015 Flange Machining
7092 11/05/2015 TRUNNION PIVOTS 140 Dia x 60mm Lg
both to be sleeved
7093 11/05/2015 3B MARK ‘Y’ JET ATOMISER ASSY WITH BELLOWS (FABRICATED BODY & TAILPIECE)
7087 08/05/2015 Unloader, M24 Hole Repair
7080 05/05/2015 BI460 GDF SUEZ E&P CYGNUS UQ TOPSIDE, Machine 2 off 850x800mm pads at Methil Yard
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >