Reekie Experience
6674 24/07/2014 drill sixteen additional holes 65 mm dia, refer to emails of 11th and 17th Sept 2014
6674 24/07/2014 GDF Cygnas Grout Hole Drilling 4-off Ø65mm holes at 12 locations
6673 23/07/2014 C.I.CANNON HOUSING (CC 1000)
6673 23/07/2014 C. I.AIR TANK CAP 389 MM O/DIA
6666 22/07/2014 BRUSH PLOUGH CARRIERS c/w MK1,2,3,12
6666 22/07/2014 WEAR PLATE BOLT c/w NUTS
6667 22/07/2014 ADAPTOR FOR COUPLING GAURD
6667 22/07/2014 ADAPTER FOR COUPLING GUARD (POS 001)
6667 22/07/2014 COUPLING GUARD
6669 22/07/2014 Repair to 1″ NPT penetrations on DDC2
6662 21/07/2014 Rosehall Wind Farm, nr Lairg – Replacing Hinges on 19-off Towers, 2 doors per tower
6663 21/07/2014 UFF Transport Frame
6665 21/07/2014 Mariner Underflow Plates
6659 18/07/2014 DECK SHEAR FLATS
6653 15/07/2014 Ø14mm Dowel Removal
6650 14/07/2014 ITEM 5 PIN FOR RH AND LH
6650 14/07/2014 ITEM 2 TO DRILL 9 MM DIA AND C/BORE 26 MM DIA X 5 MM DEEP FOR RH AND LH
6650 14/07/2014 TO SCREWCUT M20 X 100 MM LONG ON 20 MM BAR EACH END ONLY
6650 14/07/2014 TO DRILL 9 MM DIA AND C/BORE 26 MM DIA X 5 MM DEEP ON LOOSE PLATE
6650 14/07/2014 TO DRILL 9 MM DIA AND C/BORE 26 MM DIA X 5 MM DEEP ON LOOSE PLATE
6650 14/07/2014 TO MACHINE 35 MM BORE AND FACE BOSS TO 66 MM OVERALL
6651 14/07/2014 REPAIR TO ONE SIDE ONLY OF LIEBHERR BOOM
6645 10/07/2014 TO MACHINE WELDED FACE,RECESS AND BORE AS PER INSTRUCTIONS
6646 10/07/2014 TO MACHINE WELDED FACE,RECESS AND BORE AS PER INSTRUCTIONS
6641 09/07/2014 SPRING SEAT ( WITH WASHER )
6641 09/07/2014 SPRING SEAT( WITH WASHER)
6644 09/07/2014 9000 ton upset press tail rod hole for eye bolt
6628 27/06/2014 ITEM 3 CHAIN PULLEY ROLLER MODIFICATION
6628 27/06/2014 ITEM 2 ROLLER BUSH REPLACEMENT ONLY
6628 27/06/2014 1.1/2″ BSF STST HEX NUTS
MAT’L GRADE A4
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >