Reekie Experience
6576 27/05/2014 Machining 4-off Hangar Pin Location Seats, 400x200mm adjacent to a moonpool
6572 23/05/2014 DR50 HEEL SPACERS
6572 23/05/2014 0.75BSF 45MM SPACER
6572 23/05/2014 DR50 LOCATION PLATE FOR MHDR32 STAND
6572 23/05/2014 MACHINING OF HATCH COVER FOR MOCK UP
6569 22/05/2014 Wartsila thruster, detail F of repair proposal 19A nozzle, Drg No P0248/3232
6566 21/05/2014 DELIVERY OF GOODS VIA TNT
6566 21/05/2014 Toolholder
6566 21/05/2014 0º Form Tool 1/2″ Shank
6566 21/05/2014 37.1/2º Form Tool
6566 21/05/2014 Toolholder
6568 21/05/2014 e-on Humber Gateway Offshore Windfarm Ref 1019-14-04014
Onsite machining of sixteen Mono pile flanges 3820 id x 4500 od, 80 flat, 260 tapered
6560 16/05/2014 C.S. BRUSH PLOUGHS c/w FLATS and SCREWS
6558 15/05/2014 Building 69, drill out 8 off steel M8 studs in ST/ST vessel
6549 08/05/2014 BRUSH PLOUGH CARRIERS c/w MK1,2,3,12
6550 08/05/2014 BUSH FOR CAT988 STEERING ANCHOR
6550 08/05/2014 CAT 988 BELL CRANK MACHINING & CAT 988 STEERING ANCHOR POINT
VEHICLE ID: NO.7
6543 02/05/2014 Longannet Unit 1 Contract
6543 02/05/2014 Longannet Power Station, Main Steam Pipe CMV Excavation, 256mm control bore and 79mm wall thickness, i.e. 16.3″ OD
6542 01/05/2014 Machine No 1000, 30,000 ton press, moving platen, underside face, insitu machining to lengthen four slots
6542 01/05/2014 30,000 Ton Press, machine underside of platen flat and level to within 0.5mm
6539 30/04/2014 CU/NI. GUIDE TUBE FLANGE
6540 30/04/2014 Vessel Drg No PB015849 rev G, flangeDrg No PB015968 rev A
onsite machining of two main flanges, 2200 id x 2335 od sealing faces, pre glassing bore of vessel
6537 29/04/2014 Dow Corining Vessel flanges to drawing 08060017
5-off Flanges in total
6536 28/04/2014 Longannet Unit 2 Secondary superheater outlet header. Trepanning of 100mm holes through 98mm header
6529 24/04/2014 new value
6529 24/04/2014 Stud Removal and Boring machine to fit dia 8″, 16″ deep
6531 24/04/2014 Retro Fit HS Cover 2,3 ABB R
6531 24/04/2014 Retro Fit HS Cover 2,3 ABB L
6528 23/04/2014 7 – 8 Holes to be drilled out and tapped to M20. Plate is 30/40mm.
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >