Reekie Experience
6450 05/03/2014 NSRS, Stabiliser Unit ‘Stab’. Machine slew ring Ø26 bolt holes to create 2mm chamfer. 30 off holes on inner ring, 30 off holes on outer ring
6441 27/02/2014 NUT
6441 27/02/2014 INNER BARREL
6438 26/02/2014 Havila Phoeniz, Support Vessel, Machining and drilling of deck pads for 2000T Carousel. Work to be carried out in Norway
6436 24/02/2014 Unit 1 HP main steam loop pipe under HP, 16.3/16″ od x 10.1/4″ id (2.97″ wt) forged CMV pipe to cast CMV, weld excavation
6433 19/02/2014 3.75″ Dia Hole through a 400mm thick steel plate, with 15 deg lead in 1.5″ deep, 4340 material
6427 18/02/2014 Jawstock Inner Bearing Housings Repair
6424 17/02/2014 ARRANGEMENT OF 110 SERIES CEPAC SS D/A CYLINDER
6424 17/02/2014 ARRANGEMENT OF 85 SERIES-SP CEPAC SS D/A CYLINDER
6426 17/02/2014 shop work, machine two o ring grooves on two free issue stst sacrificial rings from Orelia to detail A and detail B of Technip Drg No WK0929.000-0490 rev 1
6422 14/02/2014 Machining out Ø80 Pin
6419 13/02/2014 Transportation costs associated with delivery of final goods or equipment to Customer
6419 13/02/2014 HYJECTOR COVER
6419 13/02/2014 HYJECTOR BODY ‘Y’ PIECE
6416 11/02/2014 Bogie Drilling
6416 11/02/2014 TAPERED DOWEL PIN FOR RAILWAY BOGIE
6417 11/02/2014 Petrobel Deka Spoolbody Machining, Modification to 18.75″ VX Groove
6410 06/02/2014 Rockwater 1 – Sheave Boring
6411 06/02/2014 Transportation costs associated with delivery of final goods or equipment to Customer
6411 06/02/2014 INLET NOZZLE FOR RATCLIFFE
6411 06/02/2014 HYJECTOR COVER
6411 06/02/2014 HYJECTOR BODY ‘Y’ PIECE
6398 04/02/2014 MS ADAPTOR PLUG ( AS SAMPLE )
6399 04/02/2014 MS ADAPTOR PLUG ( AS SAMPLE )
6386 29/01/2014 Solan Topside, Crane Pedestal, Ø2650odx2350id (150 wide) , to be flat within 0.3mm
6387 29/01/2014 Retro Fit HS Cover 2,3 ABB R
6387 29/01/2014 Retro Fit HS Cover 2,3 ABB L
6388 29/01/2014 Retro Fit HS Cover 2,3 ABB R
6388 29/01/2014 Retro Fit HS Cover 2,3 ABB L
6389 29/01/2014 Retro Fit HS Cover 2,3 ABB R
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >