Reekie Experience
6389 29/01/2014 Retro Fit HS Cover 2,3 ABB L
6390 29/01/2014 Retro Fit HS Cover 2,3 ABB R
6390 29/01/2014 Retro Fit HS Cover 2,3 ABB L
6381 27/01/2014 SPRING SEAT( WITH WASHER)
6381 27/01/2014 SPRING SEAT( WITH WASHER)
6383 27/01/2014 Skandi Achiever
6378 24/01/2014 Sellafield, SPP1 Machining on vessels
6374 23/01/2014 MACHINE A Ø1725mm x 1.5mm RAISED FACE ON A TEST BLANK FLANGE
6377 23/01/2014 Die Set Heater Removal
6368 22/01/2014 Transportation costs associated with delivery of final goods or equipment to Customer
6368 22/01/2014 HYJECTOR COVER
6368 22/01/2014 HYJECTOR BODY ‘Y’ PIECE
6364 17/01/2014 BOP ALIGNMENT SYSTEM BOP WELLHEAD GUIDE
6360 15/01/2014 Caneron 22″ valve stub end, re weld prep
6354 10/01/2014 2.5° Vessel Flange Facing
6355 10/01/2014 BRUSH PLOUGH CARRIERS c/w MK1,2,3,12
6355 10/01/2014 MACHINING OF UPPER AIR SEAL RING
6356 10/01/2014 BFP M/Board Bushes
6351 09/01/2014 CUP FOR PUSH ROD (REF 16)
6353 09/01/2014 hire of insitu drilling equipment, two DR100 + HPU’s plus either core drills 90.25 dia x 320 reach or drgs for same
6349 08/01/2014 Transportation costs associated with delivery of final goods or equipment to Customer
6349 08/01/2014 HYJECTOR BODY ‘Y’ PIECE
6350 08/01/2014 Longannet Unit 4, 7A & 7B HP Heater doors, possibly doors and or doorways
6345 07/01/2014 Flange Repair on Base of Titanium Vessel
6346 07/01/2014 Union Square Shopping Centre Access Gates. Drilling of 6mm holes
6343 06/01/2014 Wellservicer Medical Locks, 3-off Machining of sealing faces and testing 40Bar for 10 mins
6340 18/12/2013 Bow Thruster Pinion Bearing Machining
6332 11/12/2013 Bell Trunk Upper and Lower Faces on Entry Locks 1&2
6333 11/12/2013 Bow Thruster Pinion Bearing Machining
6329 10/12/2013 Bibby Polaris – Release Gear Modification on Lifeboat Hook
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >