Reekie Experience
6325 09/12/2013 ELBOW PIN MODIFICATION
6326 09/12/2013 Flex Fatigue Machine
6321 05/12/2013 M8 SPRING WASHER IN A4 STAINLESS STEEL
6321 05/12/2013 A4 STAINLESS STEEL M8 X 30MM LG SOCKET HEAD CAP SCREWS
6321 05/12/2013 Bibby PolarisBell lower flange new tapped holes to secure sacrificial ring
6316 04/12/2013 Boeing fitting rework, at Southend, as per Supertee instructions
6312 03/12/2013 MV Coruisk, Bow Visor Hydraulic Cylinder Mounting Bushes 8 off carbon steel (originally to be stst but client changed his mind) approx 82 od x 70 id x 101.6mm long
to suit actual bored diameter and length and pin dia
6312 03/12/2013 MV Coruisk, Bow Visor operating cylinder, cheek plate line boring
6309 29/11/2013 1000 MAIN FRAME REPAIR WITH NEW 50D RING
6298 22/11/2013 4th retort vacuum flange
6298 22/11/2013 Machining of 3 off Retort Vacuum Flanges
6294 21/11/2013 DRYER ROLLER PATH
6296 21/11/2013 TO MACHINE TAPER FOR CONEHEAD 1300 M/C WELD UP TAPER RESET AND MACHINE TAPER 39.2 ° TO 4 MM DIMENSION
6297 21/11/2013 C.S. BRUSH PLOUGHS c/w FLATS and SCREWS
6297 21/11/2013 INNER RETAINERS
6297 21/11/2013 OUTER RETAINERS
6288 20/11/2013 OVERSIZE SLEEVE TO SUIT THE RECLAIMER SHAFT AT DRAX PS
6288 20/11/2013 Reclaimer Screw Repair
6293 20/11/2013 DSV Commander divers’ chamber one door trunk/coaming sealing face with O ring groove as on Orelia & Alliance (for Technip)
6286 19/11/2013 FACING AND RAD TOOL
6286 19/11/2013 RB50 Facing Head
6286 19/11/2013 SPHERICAL BEARING BRASS TIPPED GRUB SCREW (M10 X 1.25 MM PITCH)
6286 19/11/2013 0.5in STUD LOCATION D WASHER
6286 19/11/2013 CAGE SETTING SPHERICAL JACK SCREW
6286 19/11/2013 AXIAL FEED JAM NUT
6286 19/11/2013 7/16 UNF LOCATION PLATE EXTENDED NUT
6286 19/11/2013 7/16 UNF LOCATION PLATE EXTENDED NUT
6286 19/11/2013 0.5 UNF LOCATION PLATE EXTENDED NUT
6286 19/11/2013 0.5 UNF LOCATION PLATE EXTENDED NUT
6286 19/11/2013 0.5in STUD LOCATION WASHER
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >