Reekie Experience
6284 18/11/2013 TSG Ferrybridge, High Pressure Steam Inlet Flange
6285 18/11/2013 C3873 repair of pig launcher, cold cut 371 id x 19 wt shell at two places
6281 14/11/2013 Supply of operator and machine to carry out line boring
6280 13/11/2013 1000 Press Cylinder Refurbishment, machine 2 off 51.5″ dia x 150mm long to 32micron finish. 24 hour cover during Christmans Shutdown (but not working public holidays)
6275 11/11/2013 GP III, thruster nozzle repair proposal 19A nozzle
6271 07/11/2013 Grand Canyon cargo deck drilling and tapping for HST A frame stool, heave compensator, set out using free issue templates, whilst alongside at Blyth, 24 hour cover
6266 05/11/2013 Phos Bronze Bush
6267 05/11/2013 Machining requirements for TQR lab in Rosyth
modifications to tensile testing machine
further info including drg required from customer
6257 30/10/2013 Press Heater location plate hole drilling
6246 24/10/2013 TO SKIM ONE FACE ON TOP PLATE FOR 32″,30″,28″ AND 24″ (50″ O/DIA X 22″ I/DIA)
6246 24/10/2013 TOP PLATE 50″ O/DIA X 34″ I/DIA X 60 MM THICK TO FACE 10 MM OFF 1 SIDE TO 50 MM THICK
6246 24/10/2013 TO MACHINE 1 FACE AND ALSO MACHINE 4 OFF POCKETS ON OPPOSITE FACE FOR JACKS ON 40″ TEST RIG PLATE MILL 50 MM FLAT ON EDGE
6246 24/10/2013 TO SKIM ONE FACE ON BOTTOM PLATE FOR 32″,30″,28″ AND 24″ (36″ O/DIA X 1/2″ B.S.P. I/DIA)
6246 24/10/2013 BOTTOM PLATE 50″ O/DIA X 2.1/2″ I/DIA X 55 MM THICK TO FACE 5 MM OFF 1 SIDE TO 50 MM THICK
6249 24/10/2013 PIVOT
6249 24/10/2013 PIVOT
6249 24/10/2013 PIVOT
6249 24/10/2013 PIVOT
6249 24/10/2013 Additional Hours Worked as request by Ian Cameron of NOV for Rigmar O/No. 48934/13991 & 48935/13992
6249 24/10/2013 11.1/2″ WIDE SLIDE
6238 21/10/2013 CAST STEEL SWING JAW
6238 21/10/2013 SHAFT FOR SWING JAW
6238 21/10/2013 BUSHES FOR SWING JAW
6239 21/10/2013 MS SLEEVE ( MACHINING & ASSY ITEMS 1 ,2 & 3
6239 21/10/2013 PHOS BRZ .BEARING 126 MM O/*DIA X 40 MM LONG
6240 21/10/2013 1000 MAIN FRAME REPAIR WITH NEW 50D RING
6241 21/10/2013 BRONZE PUSH PLATE
6241 21/10/2013 BRONZE PUSH PLATE
6241 21/10/2013 ALUMINIUM PUSH PLATE
6227 15/10/2013 Alignment Wedges
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >