Reekie Experience
6227 15/10/2013 OUTBOARD BORE PLAIN SETTING BUSH (107DIA)
6227 15/10/2013 REAR BRACKET SPACER
6227 15/10/2013 Front Bracket Plate Spacer
6227 15/10/2013 OUTBOARD BORE PLAIN SETTING BUSH (111DIA)
6227 15/10/2013 INBOARD BORE PLAIN SETTING BUSH (76.5DIA)
6227 15/10/2013 7/16 UNF LOCATION PLATE EXTENDED NUT
6227 15/10/2013 0.5 UNF LOCATION PLATE EXTENDED NUT
6229 15/10/2013 In situ machining of LTS4 LSS Reduction Gearbox shaft
6222 10/10/2013 DOWEL FOR MG EXCITER
6221 09/10/2013 ST. ST SHELL344.8 MM O/DIA X 695.4 MM LONG
6213 04/10/2013 WEAR PLATE BOLT c/w NUTS
6215 04/10/2013 6′ – 9.1/2″ O/DIA X 100 MM THICK BLANKING FLANGE
6216 04/10/2013 Mast-U Vessel Modifications, various pentrations and machining on 4000mm id x 20wt 304 st/st vessel.Dowel Castellated Dowel Ring Holes
6216 04/10/2013 Mast-U Vessel Modifications, various pentrations and machining on 4000mm id x 20wt 304 st/st vessel.Main Cylinder Machining.
6216 04/10/2013 Mast-U Vessel Modifications, various pentrations and machining on 4000mm id x 20wt 304 st/st vessel. Design, Equipment Preparation, Top and Bottom Cylinder
6208 03/10/2013 Twin Bearing House bed plate modification. Slot 4 off Ø24 holes by 15mm
6211 03/10/2013 BRUSH PLOUGH CARRIERS c/w MK1,2,3,12
6205 02/10/2013 CONICAL FILTER 2085 MM O/DIA X 685 MM O/ALL
6201 27/09/2013 TENDING SIDE RAIL SYSTEM
6201 27/09/2013 DRIVE SIDE RAIL SYSTEM
6201 27/09/2013 DOCTOR ASSEMBLY SAE ALL TRAY
6202 27/09/2013 DRILLED FLANGE HUB PLATE
6193 24/09/2013 ALLOY 800 TUBESHEET1074 MM O/DIA X 50 MM O/ALL
6188 23/09/2013 SHEAVE LIFTING HOLES
6189 23/09/2013 Line Boring Column Top & Bottom (Weldment)
6186 20/09/2013 Line Boring Column Top & Bottom (Weldment)
6182 18/09/2013 ONE PIECE UPPER FRAME (MC) TO MACHINE TAPER,WELD AND REMACHINE TAPER
6178 16/09/2013 Hire of 1149 with 2.25″ bar x 100″ long, to machine Ø3 & Ø3.5″ bores
6177 13/09/2013 BRUSH PLOUGH CARRIERS c/w MK1,2,3,12
6175 12/09/2013 hire of insitu drilling equipment, two DR100 + HPU’s plus either core drills 90.25 dia x 320 reach or drgs for same
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >