Reekie Experience
6127 22/08/2013 Forth Replacement Crossing, approach viaducts, pier diaphragm bearing box 5
6127 22/08/2013 4th box Forth Replacement Crossing, approach viaducts, pier diaphragm bearing
6127 22/08/2013 3rd box Forth Replacement Crossing, approach viaducts, pier diaphragm bearing box
6127 22/08/2013 2nd box Forth Replacement Crossing, approach viaducts, pier diaphragm bearing box
6127 22/08/2013 16th box, machining of underside face
6127 22/08/2013 15th box machining of underside face
6127 22/08/2013 14th Box, abutment with 490 step height
6127 22/08/2013 13th box, abutment box with 490 step height
6127 22/08/2013 12th box
6127 22/08/2013 10th Box Forth Replacement Crossing
6127 22/08/2013 1st box and preparation of equipment for Forth Replacement Crossing, approach viaducts, 1st pier bearing box
6122 21/08/2013 SPACER RING DETAIL
6123 21/08/2013 U? Main Boiler Feed Pump Excavation Ø404mm od x 65mm thk. Excavate to 56mm deep
6119 20/08/2013 Survey the Ø2,400mm od x Ø 2,110mm id slew ring seating. Seating to be flat to +/- 0.25mm within any 1000mm of arc and any changes should be gradual. Taper on face to be no more than 0.15mm as checked with a straight edge.
Location: Esbjerg, Denmark
6120 20/08/2013 Torr Achilty Power Statio, shaft sleeve machining. Cutting and removal of exisitng solid shaft support ring and supply of new shaft support ring
6117 19/08/2013 ITEM 13 70 MM DIA THREADED BAR X 1096 MM LONG
6114 16/08/2013 Compressor bedpalate machining 110″ x 48″
6113 15/08/2013 U3 STEAMCHEST LEG OD PROFILING
6108 14/08/2013 1000 MAIN FRAME REPAIR WITH NEW 50D RING
6108 14/08/2013 CONE HEAD 1000 CONE TO WELD LAB STRIPS REMACHINE LAB STRIPS,WELD AND MACHINE TAPER
6111 14/08/2013 5MM SLIT VALVE FACE PLATE SPACERS
6111 14/08/2013 FRONT GATE VALVE PLATE (RIGHT SIDE)
6111 14/08/2013 SIDE SEAL PLATE
6111 14/08/2013 SIDE NOTCH PLATE
6111 14/08/2013 FRONT GATE VALVE PLATE
6111 14/08/2013 CHAMBER COVER PLATE
6111 14/08/2013 CHAMBER COVER RING INTERMEDIATE SECTION
6111 14/08/2013 CHAMBER COVER RING END
6104 12/08/2013 1000 ONE PIECE UPPER FRAME MEDIUM COARSE TO ROUGH 1459.75 DIA FINSH : TURN 1182 MM DIA : CHECK TAPER AND WELD IF CUSTOMER REQUIRES
6104 12/08/2013 CONE HEAD 1000 CONE TO WELD LAB STRIPS REMACHINE LAB STRIPS,WELD AND MACHINE TAPER
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >