Reekie Experience
5569 25/10/2012 FABRICATED FLANGE NOZZLE
5570 25/10/2012 2 off Riser Adaptor Body, 13 5/8”, pre weld machining, standby, final machine to drawing size
5571 25/10/2012 Hire of RB6 machine
5566 24/10/2012 PIN 70 MM DIA X 262 MM LONG
5566 24/10/2012 PIN 70 MM DIA X 187 MM LONG
5566 24/10/2012 pin housings remove bushes size bores weld build up bore supply bushes fit bushes
5567 24/10/2012 BRUSH PLOUGH CARRIERS c/w MK1,2,3,12
5560 23/10/2012 premachining two free issue rings 2200 id x 2335 od x 129 thick to Drg No PB001907 rev C
5561 23/10/2012 ST. ST .MOTOR HOUSING 249 MM O/DIA X 167.9 MM I/DIA X 384 MM LONG
5561 23/10/2012 ST ST TORQUE RIG HOUSING.320 MM O/DIA X 180 MM I/DIA X 451 MM O/ALL
5562 23/10/2012 ISM of 2 off Voith Seats, 2032ID x 2145OD
5562 23/10/2012 ISM of 2 off Voith Seats, 2032ID x 2145OD
5556 19/10/2012 Longannet Unit 1, 1B boiler feed pump plummer blocks, dowels
5557 19/10/2012 WEAR PLATE BOLT c/w NUTS
5554 18/10/2012 C.S. BRUSH PLOUGHS c/w FLATS and SCREWS
5552 17/10/2012 M.S, INSERTION TOOL 190 MM O/DIA X 168 MM I/DIA X 550 MM O/ALL
5552 17/10/2012 ST. ST. DUMMY DRIVESHAFT 205 MM O/DIA X 442.5 MM LONG
5549 16/10/2012 DRIVE SPROCKET
5546 15/10/2012 REPAIR OF WHEEL INCLUDING 2 OFF NEW TOP HAT BUSHES
5546 15/10/2012 170 MM ODIA X 650 MM LONG PIN
5546 15/10/2012 195 MM O/DIA X 170 MM I/DIA X 115 MM LONG BUSH
5541 10/10/2012 MS END CAP 275 MM O/DIA X 310 MM O/ALL
5541 10/10/2012 MS END CAP 215 MM O/DIA X 309 MM O/ALL
5537 09/10/2012 Lassing Reactor 17 Nozzle manufacture complete supply by Reekie
5532 08/10/2012 GENERAL PICKUP AND DELIVERY OF GOODS
5532 08/10/2012 SHOOTBOLT RECEIVER BLOCK – SLAM SIDE
5533 08/10/2012 preparation and hire of milling equipment to mill 25mm ? from 170x 1200 surface uphand, only 500 vertical clearance under surface and 300 at each end
5534 08/10/2012 SPA ship handling system cradle hydraulic ram end eye pins
5534 08/10/2012 SHORT ROD EYE PIN
5534 08/10/2012 ROD EYE PIN
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >