Reekie Experience
5524 04/10/2012 LASER CUT WASHER FROM 2MM THK STAINLESS STEEL
5524 04/10/2012 1.1/2″ O/DIA X 3/8″ I/DIA X 0.90″ WIDE WASHER
5524 04/10/2012 9/16″ O/DIA X 3/8″ I/DIA X 1/4″ WIDE WASHER
5524 04/10/2012 KNURLED NUT 45 MM O/DIA X 20 MM DIA X M10 THREAD X 60 MM LONG
5527 04/10/2012 insitu machine the minimum, up to a maximum of 2mm from outside face of a 2.1/4″ id x 6.1/2″ od connecion pad on the jacket of the Calsis reactor vessel
5527 04/10/2012 Calsis reactor vessel (the 3rd one to have BDC nozzle replaced) bottom dead centre nozzle
1, cold to to remove old nozzle and create larger weld prepped penetrations
2. finish machine face of new nozzle
5520 03/10/2012 Repair to R2 Machine
5520 03/10/2012 Courier of R2 machine to Hereford and Hire of R2
5520 03/10/2012 Courier of R2 machine to Hereford and Hire of R2
5515 27/09/2012 MAIN FRAME LOWER LONGITUDINAL SECTION
5510 26/09/2012 Transportation costs associated with picking up material from Customer site for delivery to Reekie.
5510 26/09/2012 Transportation costs associated with delivery of final goods or equipment to Customer
5510 26/09/2012 SEGMENT RING CASTINGS TO DRILL AND TAP HOLES AS PER INSTRUCTIONS
5510 26/09/2012 LINER RING HALF
2210.3 OD X 2146.3 ID X 20 THK
5511 26/09/2012 TO SUPPLY NEW BOTTLE ROLLER ASSEMBLY COMPLETE WITH 8 OFF SPACERS FOR SIDE RAILS
5474 25/09/2012 Flange Bed Machining, machining of 12 off 1650×120 bars to within 0.2mm
5504 21/09/2012 STST BOLLARD 101 X 93 X 75 Lg
5504 21/09/2012 STST BOLLARD 101.6 OD X 95 ID X 75 Lg
5497 19/09/2012 Stringer Machine Modifications
5497 19/09/2012 Stringer Machine Modifications
5497 19/09/2012 Stinger Router Bottom Skin Rib22
5497 19/09/2012 Design of machine tool to machine stringer
5498 19/09/2012 Kelly tube repair (threaded end of steel cylinder for storing compressed gas for divers, (removal of plug only, female thread undamaged)
5489 18/09/2012 TO WELD REPAIR COVER THEN REMACHINE HOLES AND SEAL FACE
5491 18/09/2012 REPAIR OF WHEEL INCLUDING 2 OFF NEW TOP HAT BUSHES
5491 18/09/2012 170 MM ODIA X 650 MM LONG PIN
5491 18/09/2012 TO REPAIR EDGES AND SEAL DIAMETER ON CHAIN GUIDE
5491 18/09/2012 195 MM O/DIA X 170 MM I/DIA X 115 MM LONG BUSH
5492 18/09/2012 rotor coupling ten hole hole patch plate
5487 17/09/2012 2″ DIA X 178″ LONG TIE BAR SCREWED 24″ LONG @ ONE END AND 12″ LONG @ OTHER END COMPLETE WITH 8 OFF M48 FULL NUTS
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >