Reekie Experience
5435 17/08/2012 ITEM 3 BEARING
5435 17/08/2012 ITEM 2 BUSH
5431 16/08/2012 Unit 2 HP turbine casing, top and bottom halves, four dowel holes, core drill/ream/bore/hone
5426 13/08/2012 Bending Machine insitu machining of 1066.8 mm id x 1200 od top face and 1066.8 diameter x 95mm long bore to clean face up flat and level and bore perpendicular to fac
5424 10/08/2012 Fragmatiser plumber block seating. Machine 2 off 850×350 welded up sections,to finish flush with original face.
5422 09/08/2012 Riser Adaptor Body 18.3/4 machining
5418 06/08/2012 Construction Foundation Turntable, machining of st/st bearing ring
5411 01/08/2012 Alcan Lochaber PS, five “new” horizontal Francis Turbine Units, bearing supports
5404 30/07/2012 Alcan Lochaber PS, five “new” horizontal Francis Turbine Units, bearing supports
5399 27/07/2012 WELDER QUALIFICATIONS TO BE DONE AT DOOSAN BABCOCK RENFREW
5399 27/07/2012 Cable Grab, machining of various bores to suit exisitng pins, total of 30 bores, 6 off bores to be machined insitu
5400 27/07/2012 PORVAIR FILTER 144 DIA
5394 25/07/2012 Lynemouth Power StationUnit 3 Boiler Feed Pump
5393 24/07/2012 RB40 Insitu Machine
Boeing A737
5390 23/07/2012 GENERAL PICKUP AND DELIVERY OF GOODS
5390 23/07/2012 NEW SERVO TOP BUSH
5390 23/07/2012 SERVO SHAFT INSPECTION
5390 23/07/2012 FINISH MACHINING OF SERVO PISTON
5390 23/07/2012 BORING & HONING OF SERVO CASING
5390 23/07/2012 SERVO BOTTOM COVER WITH BUSH
5386 19/07/2012 Airbus A320 Gear Rib Boring and Facing Machine, Design costs and Bracket Rework
5386 19/07/2012 Airbus A320 Gear Rib Boring and Facing Machine
5377 18/07/2012 Shaft machining. Machine face and radius of 9″ od, 6.41″id face, machine 6.41″ dia x 1″ long, machine 0.25″ radius with form tools
5381 18/07/2012 MOTOR C/W SHAFT ( SHAFT SWEATED ON )
5383 18/07/2012 Transportation costs associated with delivery of final goods or equipment to Customer
5383 18/07/2012 HYJECTOR COVER
5383 18/07/2012 HYJECTOR BODY ‘Y’ PIECE
5359 11/07/2012 Riffgat Contract, one monopile R16, 4700 od x 70 wt at top end, tapered at 2.282 degrees aside to 6500 od at 22580 length, 60200 mm long,
5359 11/07/2012 additional costs
5362 11/07/2012 Longannet Unit 2, S142 valve body faces,
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >