Reekie Experience
5274 22/05/2012 BASE PLATE WRS BASE SUPPORT
5274 22/05/2012 BRACKET TENDING SIDE WRS WADING ROLL SYSTEM
5270 21/05/2012 Longannet Outage Unit 2 & 4 Off-Site Machining of Misc valves
5256 09/05/2012 hire of AX630 or other suitable for insitu machining 440 id x 700 od flange
5251 08/05/2012 STEM for DN700mm series gate valve
5249 04/05/2012 1000 MAIN FRAME REPAIR WITH NEW 50D RING
5247 03/05/2012 Machining weld between stud and splice plate
5241 02/05/2012 ATTEMPERATOR DIAPHRAGM
5241 02/05/2012 SPRAY NOZZLE
5241 02/05/2012 ITEM 1 ATTEMPERATOR TRANSITION HEAD
5242 02/05/2012 transport of two tubulars from Bikenhead to Buckhaven and two pairs of pad eyes from Renfrew to Buckhave, four deliveries
5242 02/05/2012 bearing tie beam pad eyes S3 & S4
5242 02/05/2012 bearing tie beams pad eyes S1 and S2
5242 02/05/2012 Britannia Monocolumn upper 3245 length of top of truss bearing support post
5243 02/05/2012 Stratavap Body, 1016 id x 16 wt sheel with 1016 id x 1155 od flanges each end, to drg ES80-2113-0 iss 2 and ES80-2112-0 iss 2
5240 01/05/2012 BRASS M10 RIVET PIN WITH 60º HEAD
5240 01/05/2012 Orrin Control Gates
Option 1 – 1.2m sections
5231 24/04/2012 GRADE 8.8 SELF COLOURED SET SCREWS M12 X 35 MM LONG (700-0207-70
5226 20/04/2012 3/8″ NB SCH 40 STAINLESS STEEL PIPE TO MACHINE TO 12 MM LONG
5226 20/04/2012 1/2″ NB SCH 40 STAINLESS STEEL PIPE TO MACHINE TO 12 MM LONG
5218 17/04/2012 Cameron THRT extension joint, penetration No 13 at approx 35mm dimension from 6.644″ diameter upstand, c/b 1.31″ x 3/8″ dp and retapt 1/2″ NPT
5220 17/04/2012 MS EXTENDED SPINDLES 42 MM O/DIA X 330 MM LONG
5210 12/04/2012 Wm Grant Distillers Girvan, pressure filter, replacement of one pair of side bars
5206 10/04/2012 MS PIPE BENDS 97 MM O/DIA X 12 MM WALL
5206 10/04/2012 MS FLANGED PIPE BENDS 97 MM O/DIA X 12 MM WALL
5207 10/04/2012 Metso Charging Box. Repair to 2 off M24 threads
5203 06/04/2012 PIPE FOR ECO 2 277 MM LONG SCREWED 1″ B.S.P.T ONE END AND THE OTHER SCREWED TO FIT ECO 2
5203 06/04/2012 PIPE FOR ECO 2 157 MM LONG SCREWED 1″ B.S.P.T ONE END AND THE OTHER SCREWED TO FIT ECO 2
5199 04/04/2012 1336 id x 22 wt x 2.9m long column/vessel
45 thk flange at each end
5201 04/04/2012 BASE PLATE 1800 MM X 866 MM X 125 MM O/ALL
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >